Socket Set Sizes

June 26, 2024 Post a Comment

Socket set sizes

Six Point Standard Sockets (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1) Six Point Metric Sockets (9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21) Six Point Standard Deep Sockets (1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1)

What are the 3 common sizes of ratchets?

Available with different drive sizes — 1/4 inch, 1/2 inch and 3/8 inch — to operate different size sockets. Most operate with a geared drive; those with a higher tooth count let you operate the tool with a smaller swinging motion, which is useful when there's little room to move the handle.

What size are most socket sets?

The most commonly used types are 8 mm, 10 mm and 14 mm sockets.

What are the 3 socket sizes?

Socket Drive Sizes Metric and Standard (SAE) sockets come in three available drive sizes: 1/4 inch, 3/8 inch, and 1/2 inch. The measurement refers to the size of the square used to attach the to socket to a wrench or a ratchet.

Are 3/4 and 19mm the same?

19mm = 3/4 inch. 20mm = 25/32 inch. 21mm = just over 13/16 inch. 22mm = almost 7/8 inch.

Should I get metric or SAE sockets?

Typically, SAE sockets and wrenches are used on American-made cars, as mentioned previously, however, when it comes to working on imported cars (assuming you're in the USA) you'll most likely be looking for metric units of measurement.

Whats bigger 3/8 or 1/4 socket?

3/8 is expressed as 0.375 as a decimal and 1/4 is expressed as 0.25 in its decimal form. It is clear that the value of 3/8 is more than 1/4. Hence, it is bigger.

What are the 4 different types of sockets?

However, some of the commonest options you would find are 36mm sockets and 10mm sockets. Considering the standard sockets, you can find four common types, and they include 3/4 –inch, ½-inch, 3/8-inch, and ¼-inch sockets. Most of these options mentioned above come with bits that would fit Torx screws.

What are 1/4 ratchets used for?

A 1/4-inch ratchet is best for smaller sockets and precision work. The most versatile ratchet is the 3/8-inch size. This ratchet size can accommodate sockets of all sizes. It is big enough to apply a lot of force, but it can still fit into tight spaces.

What are the 3 types of sockets?

Three types of sockets are supported:

Stream sockets allow processes to communicate using TCP. A stream socket provides bidirectional, reliable, sequenced, and unduplicated flow of data with no record boundaries.
Datagram sockets allow processes to use UDP to communicate. ...
Raw sockets provide access to ICMP.

What sockets do mechanics use?

⅜” drive sockets are the most practical sockets for most automotive jobs. If you can only pick one drive socket set — you want a ⅜” drive set. However, these still won't let you complete any job. ½” drive socket sets are the largest drive sockets that most mechanics need.

What size sockets are available?

There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters). In-between sizes are available too, starting with 1/4 inch (0.6 centimeters) and increasing every sixteenth of an inch (0.16 centimeters).

Do I need a 1/2 ratchet?

1/2 ratchets are great for doing suspension and exhaust work but honestly not needed. You can get by with a 1/2 breaker bar and a good assortment of 3/8 sockets. I rarely use my 1/2 ratchet. I get a lot of use out of mine.

How do I choose a socket set?

When selecting a socket set, you should think about where you will be using it as well as what it must include. Instead, try to buy the socket set that will expand your tool collection in the best way, and concentrate on the size range of sockets included, both standard and deep lengths, in metric and imperial sizes.

What is a 10mm socket in standard?

So what is a 10mm socket equivalent? The equivalent imperial size of a 10mm socket is a 3/8 socket. Imperial sizes are known as SAE (Society of Automotive Engineers) or Standard.

Can I use a 3/4 socket instead of a 19mm?

No, there's no need to get a 19mm socket, and it will present no difference in performance just because the number on the side is different.

What size is a 19 mm in standard?

Bolt Diameter	Metric	Standard
1/2"	19mm	3/4"
9/16"	21mm	13/16"
	22mm	7/8"
5/8"	24mm	15/16"

What size is 10mm?

MM	Approximate Size In Inches	Exact Size In Inches
10mm	Little over 3/8 Inch	0.39370 Inches
11mm	7/16 Inch	0.43307 Inches
12mm	Just short of 1/2 Inch	0.47244 Inches
13mm	Little over 1/2 Inch	0.51181 Inches

Does anything use SAE anymore?

Improvised repairs: Hardware stores still mostly sell SAE, so many improvised repairs will involve SAE nuts and bolts that you may have to deal with. Also, many aftermarket battery terminals are still SAE.